iPower 2-Pack 4 Feet 2-Bulb T5 Fluorescent Light Stand Rack

power’s T5 system delivers performance, flexibility and high lumen output in any growing environment. By combining high-efficiency aluminum reflector with energy-efficient/high-output T5 bulbs, these lights put out double the energy of normal fluorescent systems. Fluorescents are the most cost effective lighting system for seedlings as they begin to germinate. A lower wattage system is preferred over high intensity discharge lighting. Fluorescents are perfect for seed starting, cuttings, transplants and even supplemental lighting to help that special houseplant make it through the winter. When germinating seeds, the fixture can be kept just inches away from the seeds. After sprouting, keep the fixture 3 to 6 inches above the plant canopy. PARTS LIST: 2 – Vertical Leg Bar *24 – Foot Bar*22 – T-shaped plastic connect*22 – Straight plastic connect*21 – Crossbar with Cord & Lock*21 – T5 Fluorescent Fixture*22 – T5 High Output Fluorescent Lamp*21 – Power Cord with On/Off Switch*2INSTALLATION INSTRUCTIONS: 1. Install the foot bars onto the vertical leg bars perpendicularly with the T-shaped plastic connect. Each of the components should fit together snugly. 2. Install the crossbar to the vertical bars with the Straight Plastic connect. Each of the components should be fit together snugly. 3. Stand the structure up referring to the attached image. We recommend positioning it over a chair or other elevated surface in preparation for hanging your light fixture. 4. Set the light fixture under the crossbar as shown in figure and pull down the hanger cables. Attach the T5 fixture to the hook buckle on the adjustable cables. 5. You may adjust the height of the light fixture by adjusting the length of cord at the center of the crossbar, and setting the height by securing the locking mechanism against the crossbar.