ToolTuff Log Splitter Build Kit: 16 GPM Pump, Mount

16 GPM Log Splitter Pump 2 Stage Gear Pump That is identical pump utilized by SpeeCo, Champion, Oregon, MTD and lots of others. Use as a alternative or a “construct it your self” splitter challenge The two-stage pump can provide you quicker cycle instances and better potential stress with a small engine. Glorious to be used on log splitters, 90% environment friendly. Advisable 8-12hp engine Specs: 16 GPM @ 3600RPM. Shaft: ½” (key included) Inlet: 1″ diameter Outlet: ½” NPT Dimensions: 5.5″L x 3″H x 4″W Minimal HP: Eight RPM Requirement: 3600 for 11 GPM, pump will be operated with decrease RPM’s To be used with open middle hydraulic programs solely 1st Stage: 13 GPM@650 PSI 2nd Stage: 3 GPM@2500 PSI Most Stress: 4000 PSI Bolt Circle: 2.83in. Four Bolt Holes Spaced 2in. on Heart Bolt Gap Diameter: .344in. Rotation: Clockwise Giant Pump Mount: Size: 5-1/4″ Pump Aspect: 2-3/4″ bolt circle (Eight holes), 2″ on middle Engine Aspect: 5″ bolt circle, 3-1\/2″ on middle Sturdy case iron building Suitable with most 8-14HP fuel engines Lovejoy Coupler: A7 Auto-Return Log Splitter Valve Valve Specs: Single spool, Open middle. · Max stress ranking: 3500psi. · Aid valve set at 3100psi however is adjustable. · Working ports ½”NPT. · In/Out ports ¾” NPT · Detent Stress set at 700 psi however is adjustable. · Suitable with most splitters (SpeeCo, MTD, Courageous, Swisher and so forth) · Threaded finish cap for straightforward detent adjustment Mounting bracket holes (4) are 5/16-18 thread pitch and are spaced 1″ x 2-5/8″ aside