• 1/2″ shaft w/ keyway
  • 4-hole bolt pattern
  • 1″ barb on inlet port
  • 1/2″ NPT threads on outlet port
  • Aluminum body

The RuggedMade 13 GPM hydraulic pump is an excellent replacement pump for log splitters, hydraulic presses, snow plow power units and a variety of other agricultural power equipment. This two-stage gear pump provides faster cycle times with an over-all higher pressure rating, so you can squeeze every bit of power out of your equipment.

RuggedMade 13 GPM Hydraulic Pump Specs

  • GPM: 13
  • Type: Two Stage
  • Input RPM: 3600
  • Nominal Flow (GPM): 13
  • Min. HP Required: 6.5
  • Inlet Ports (In.): 1 Tube
  • Outlet Ports (In.): 1/2 NPT
  • Shaft OD (In.): 1/2
  • Shaft Length (In.): 1-1/2
  • Transmission: 2 Stage
  • Displacement High Pressure (Cubic In./Rev.): 0.22
  • Displacement Low Pressure (Cubic In./Rev.): 0.665
  • Drive Shaft (In.): 1/2
  • Max. PSI 1st Stage: 3000
  • Max. PSI 2nd Stage: 900
  • Unloading Valve Preset Pressure (PSI): 600 to 700
  • Mounting Positions: Horizontal & Vertical
  • Mounting Flange: 4 Bolt
  • Rotation: Clockwise
  • Hydraulic Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46)
  • Note: Not designed for use with “universal” or “tractor” hydraulic fluid
  • Note: Suction-side filtration should be no finer than 150 micron

Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.

RuggedMade 13 GPM 2 Stage Hydraulic Log Splitter Pump, 3000 PSI.

Brand

RuggedMade

EAN

0758576970929

Manufacturer

RuggedMade

Model

CBNA-10.9/2.1

MPN

4316518848

PartNumber

4316518848

Publisher

RuggedMade

Size

13 GPM

Studio

RuggedMade

UPC

758576970929

Reviews

There are no reviews yet.

Be the first to review “RuggedMade GPM 2 Stage Hydraulic Log Splitter Pump”

Your email address will not be published. Required fields are marked